WilmingtonRecruiter Since 2001
the smart solution for Wilmington jobs

Maintenance A - Mechanical/Electrical

Company: GE Aviation (US)
Location: Wilmington
Posted on: July 14, 2019

Job Description:

Location: Wilmington Job type: Permanent Sector: Manufacturing Category: Technician Jobs JOB DESCRIPTION Role Summary: The Maintenance A - Mechanical/Electrical performs a wide variety of complicated maintenance work, involving setup, installation, alteration, repair or rearrangement of machines, facilities, or equipment and their related controls. Will work a substantial portion of the time in the electric and mechanical skill or trade. Will be required to perform maintenance work other than own specialty. Essential Responsibilities: Essential responsibilities for the Maintenance A - Mechanical/Electrical will include, but not limited to: * Be responsible for setting up, maintaining, altering, installing, repairing or rearranging complex equipment or machines and their related controls * Diagnose equipment malfunctions and perform corrections with minimum of supervision. Tear down, overhaul, and reassemble intricate mechanisms, machines, apparatus, etc. involving complex mechanical, electrical, hydraulic, pneumatic and lubricating systems * Be able to read, interpret and follow complicated drawings to make accurate alignment, fits or installations of parts, equipment, such as wiring, piping, etc. Work with minimal supervision and make independent sound process judgments * Provide mechanical or electrical service on various types of machines or equipment, such as jig border, standard lathes, milling machines, welding equipment, boring mills and grinders, drills, punch press, press brakes, shears, saws, furnaces, motors; various process equipment, and control equipment such as relays, motor starters, control valves, rotometers, pressure switches, chemical or caustic equipment, etc * Perform repair or preventative maintenance on a variety of equipment, such as screw machines, straightener, pipe bender, autoclave, swager, welders, deburr equipment, pumps, automatic doors, cranes, fork lifts, battery (golf) carts, process equipment and their related control equipment * Install, repair or service such facility or production systems and their related controls as water, sanitary, generators, compressors, chemicals, compressed air, gas, steam, plumbing, and waste treatment * Operate various types of moving equipment used in installation and repair work, such as fork lift trucks, platform lift trucks, mobile crane, hoists, etc. * Continuously perform duties and tasks conforming to all safety regulations and procedures, and compliance under specific plant permits and other regulations such as NPDES, DWQ, NRC, etc., including correct documentation and follow up to insure compliance * Inspect and maintain process equipment tooling * Replace equipment tooling such as dies, punches and grinding wheels and perform routine maintenance on process equipment * Interact with team leaders, maintenance coordinators, production advisers and other personnel to ensure setup and maintenance activities are consistent with production priorities * Assist operators in troubleshooting process equipment issues * Perform other relevant duties as assigned Qualifications/Requirements: * High School Diploma or equivalent * Minimum 3 years experience in electrical and mechanical fields of maintenance work, including ability to read and interpret complex mechanical and electrical drawings, sketches, and schematics * Minimum 2 years experience in operating at least two of the following types of machine equipment: milling machines, presses (for metal fabrication), grinders (for metal fabrication), saws (for metal fabrication), shears, lathes, deburr/edge contouring machines, and skills in welding and fabrication * Minimum 3 years experience with at least two of the following gauges: micrometers, vernier scales and calipers, and dial indicators * Minimum 2 years of experience with: (a) troubleshooting mechanical and/or hydraulic/pneumatic systems; (b) precision coupling and shaft alignment; (c) precision fitting; (d) machine leveling, installation, and set-up experience is highly desirable * Minimum 2 years of experience with: (a) troubleshooting and servicing control circuits (PLC experience highly desirable); (b) industrial wiring including conduit and wire sizing per NEC; (c) 3-phase systems. Experience with voltage levels up to 480 ELIGIBILITY REQUIREMENTS: * Ability and willingness to lift up to 50 pounds, and manipulate bulky, heavy machine tools and parts, sometimes in awkward positions * Ability and willingness to climb and work at elevated levels * Must have corrected 20/20 vision and color distinction * Ability and willingness to wear protective clothing relevant to Nuclear operations, including wearing appropriate respiratory equipment * Ability and willingness to work shift work in accordance with business needs. Will be expected to respond to scheduled overtime, hold over or emergency call-in as required * Ability and willingness to wear a cell phone Desired Characteristics: * Associate's Degree in a maintenance specialty or trade school To stay connected with exciting news and the latest job opportunities from GE businesses, follow us on twitter: @gecareers About Us: Based in Wilmington, N.C., GE Hitachi Nuclear Energy (GEH) is a world-leading provider of advanced reactors and nuclear services. Established in 2007, GEH is a global nuclear alliance created by GE and Hitachi to serve the global nuclear industry. The alliance offers customers around the world the technological leadership required to effectively enhance reactor performance, power output and safety. GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender (including pregnancy), sexual orientation, gender identity or expression, age, disability, veteran status or any other characteristics protected by law. Additional Eligibility Qualifications: GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment. Additional Locations: United States;North Carolina;Wilmington; JOB DESCRIPTION Role Summary: The Maintenance A - Mechanical/Electrical performs a wide variety of complicated maintenance work, involving setup, installation, alteration, repair or rearrangement of machines, facilities, or equipment and their related controls. Will work a substantial portion of the time in the electric and mechanical skill or trade. Will be required to perform maintenance work other than own specialty. Essential Responsibilities: Essential responsibilities for the Maintenance A - Mechanical/Electrical will include, but not limited to: * Be responsible for setting up, maintaining, altering, installing, repairing or rearranging complex equipment or machines and their related controls * Diagnose equipment malfunctions and perform corrections with minimum of supervision. Tear down, overhaul, and reassemble intricate mechanisms, machines, apparatus, etc. involving complex mechanical, electrical, hydraulic, pneumatic and lubricating systems * Be able to read, interpret and follow complicated drawings to make accurate alignment, fits or installations of parts, equipment, such as wiring, piping, etc. Work with minimal supervision and make independent sound process judgments * Provide mechanical or electrical service on various types of machines or equipment, such as jig border, standard lathes, milling machines, welding equipment, boring mills and grinders, drills, punch press, press brakes, shears, saws, furnaces, motors; various process equipment, and control equipment such as relays, motor starters, control valves, rotometers, pressure switches, chemical or caustic equipment, etc * Perform repair or preventative maintenance on a variety of equipment, such as screw machines, straightener, pipe bender, autoclave, swager, welders, deburr equipment, pumps, automatic doors, cranes, fork lifts, battery (golf) carts, process equipment and their related control equipment * Install, repair or service such facility or production systems and their related controls as water, sanitary, generators, compressors, chemicals, compressed air, gas, steam, plumbing, and waste treatment * Operate various types of moving equipment used in installation and repair work, such as fork lift trucks, platform lift trucks, mobile crane, hoists, etc. * Continuously perform duties and tasks conforming to all safety regulations and procedures, and compliance under specific plant permits and other regulations such as NPDES, DWQ, NRC, etc., including correct documentation and follow up to insure compliance * Inspect and maintain process equipment tooling * Replace equipment tooling such as dies, punches and grinding wheels and perform routine maintenance on process equipment * Interact with team leaders, maintenance coordinators, production advisers and other personnel to ensure setup and maintenance activities are consistent with production priorities * Assist operators in troubleshooting process equipment issues * Perform other relevant duties as assigned Qualifications/Requirements: * High School Diploma or equivalent * Minimum 3 years experience in electrical and mechanical fields of maintenance work, including ability to read and interpret complex mechanical and electrical drawings, sketches, and schematics * Minimum 2 years experience in operating at least two of the following types of machine equipment: milling machines, presses (for metal fabrication), grinders (for metal fabrication), saws (for metal fabrication), shears, lathes, deburr/edge contouring machines, and skills in welding and fabrication * Minimum 3 years experience with at least two of the following gauges: micrometers, vernier scales and calipers, and dial indicators * Minimum 2 years of experience with: (a) troubleshooting mechanical and/or hydraulic/pneumatic systems; (b) precision coupling and shaft alignment; (c) precision fitting; (d) machine leveling, installation, and set-up experience is highly desirable * Minimum 2 years of experience with: (a) troubleshooting and servicing control circuits (PLC experience highly desirable); (b) industrial wiring including conduit and wire sizing per NEC; (c) 3-phase systems. Experience with voltage levels up to 480 ELIGIBILITY REQUIREMENTS: * Ability and willingness to lift up to 50 pounds, and manipulate bulky, heavy machine tools and parts, sometimes in awkward positions * Ability and willingness to climb and work at elevated levels * Must have corrected 20/20 vision and color distinction * Ability and willingness to wear protective clothing relevant to Nuclear operations, including wearing appropriate respiratory equipment * Ability and willingness to work shift work in accordance with business needs. Will be expected to respond to scheduled overtime, hold over or emergency call-in as required * Ability and willingness to wear a cell phone Desired Characteristics: * Associate's Degree in a maintenance specialty or trade school To stay connected with exciting news and the latest job opportunities from GE businesses, follow us on twitter: @gecareers About Us: Based in Wilmington, N.C., GE Hitachi Nuclear Energy (GEH) is a world-leading provider of advanced reactors and nuclear services. Established in 2007, GEH is a global nuclear alliance created by GE and Hitachi to serve the global nuclear industry. The alliance offers customers around the world the technological leadership required to effectively enhance reactor performance, power output and safety. GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender (including pregnancy), sexual orientation, gender identity or expression, age, disability, veteran status or any other characteristics protected by law. Additional Eligibility Qualifications: GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment. Additional Locations: United States;North Carolina;Wilmington;

Keywords: GE Aviation (US), Wilmington , Maintenance A - Mechanical/Electrical, Professions , Wilmington, North Carolina

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Other Professions Jobs


Production Employee - Soil Receiving, Truck Unloading
Description: PRODUCTION EMPLOYEE - SOIL RECEIVING, TRUCK UNLOADING br br br br LOCATION: br br Fayetteville, North Carolina br br JOB ID br br 1905053 br br Production Employee Soil Receiving, (more...)
Company: UniFirst
Location: Fayetteville
Posted on: 07/21/2019

CDL-A Truck Drivers - Dedicated Run
Description: Hiring CDL-A Truck Driversfor our Dedicated Lanes If you re looking for a set route, then look no further a Dedicated Lane is right for you As a Dedicated truck driver, you ll haul loads for
Company: C.R. England
Location: Fayetteville
Posted on: 07/21/2019

Team Lease to Own Truck Driver - Runs out of North Carolina!
Description: Ride with U.S. Xpress today We are now hiring team lease to own truck drivers for runs out of North Carolina with low weekly truck payments. We can pair you with the perfect partner ask about our Team (more...)
Company: US Xpress
Location: Fayetteville
Posted on: 07/21/2019


Class A CDL Truck Driver - OTR Reefer Team Drivers
Description: Opportunities Available for COMPANY DRIVERSBenefits ul li ALL TEAMS START AT A BASE PAY OF 0.50 PER MILE li Our OTR Reefer Drivers Earn 65,000 Annually li 5000 SIGN ON BONUS li .04 CPM (more...)
Company: Decker Truck Line
Location: Jacksonville
Posted on: 07/21/2019

Driver - Over-the-Road (OTR) Truck Driver - Class A CDL
Description: APPLY ONLINE BELOW OR CALL 855 548-2691 TODAY br br Over-the-Road truck drivers earn up to 0.47 per mile starting pay with a weekly performance pay up to 0.04 per mile. Truckers will have a (more...)
Company: Schneider
Location: Greenville
Posted on: 07/21/2019

Work from Home - Benefit Consultants
Description: We are currently interviewing serious inquires to become a self-motivated benefit consultant, working straight
Company: Ameriplan
Location: Wilmington
Posted on: 07/21/2019

Class A CDL Truck Driver - OTR Reefer Team Drivers
Description: Opportunities Available for COMPANY DRIVERS Benefits ul li ALL TEAMS START AT A BASE PAY OF 0.50 PER MILE li Our OTR Reefer Drivers Earn 65,000 Annually
Company: Decker Truck Line
Location: Wilmington
Posted on: 07/21/2019

Class A CDL Truck Driver - OTR Reefer Team Drivers
Description: Opportunities Available for COMPANY DRIVERS Benefits ul li ALL TEAMS START AT A BASE PAY OF 0.50 PER MILE li Our OTR Reefer Drivers Earn 65,000 Annually li 5000
Company: Decker Truck Line
Location: Greenville
Posted on: 07/21/2019

CDL-A Flatbed Owner Operator Truck Driver
Description: CDL-A Flatbed Owner Operator Truck Driver Bennett: Love Country. Love Trucking With Owner Operator Flatbed, Step Deck And Heavy Haul OpportunitiesHaving a family-centered culture isn t just something (more...)
Company: Bennett Motor Express
Location: Greenville
Posted on: 07/21/2019

CDL A Over the Road Company Driver
Description: 21900 HOOVER RD, WARREN MI 48089 586-580-1200 X 4 Midwest Freight Systems Corp. is a family owned and operated transportation company located in Warren MI. Our mission is based on Safety, Integrity, Respect, (more...)
Company: Midwest Freight Systems
Location: Fayetteville
Posted on: 07/21/2019

Log In or Create An Account

Get the latest North Carolina jobs by following @recnetNC on Twitter!

Wilmington RSS job feeds